Skip to main content
Stesso

Prepare Doors/Drawers & Assemble Spray Racks

0:56
7:45
530.3K views

At 0:56 in

How To Paint Or Refinish Kitchen Cabinet Doors. Cabinet Painting Hacks.

Watch on YouTube

What happens here

Prepare cabinet doors and drawers by drilling small pilot holes into an inconspicuous edge, typically the top or bottom, where any touch-ups won't be visible after reinstallation. Use a 3/32 inch drill bit for this. Screw 1-inch cup hooks into these pilot holes to create hanging points. For drawer fronts, a wooden hanger with swivel hooks can be used, attaching the drawer front to the hanger via the drilled hooks. Additionally, assemble a simple, portable rack from 1-inch PVC pipe with couplings. This rack will be used to hold individual doors or drawers for spraying.

Goal: Equip cabinet components for handling and spraying, and set up a mobile spray stand.

Tools and materials

  • 1 Inch Cup Hooks — Providing hanging points for cabinet doors and drawers
  • 1 Inch PVC Pipe — Constructing a portable spraying rack
  • 3/32 Inch Drill Bit — Creating small pilot holes for cup hooks
  • Cordless Drill — Drilling pilot holes into cabinet doors and drawers
  • PVC Couplings — Securing the hanger on the PVC pipe stand, preventing it from sliding
  • Wooden Hangers with Swivel Hooks — An alternative or supplementary hanging method, particularly useful for drawer fronts

What they say

Hide

using 1 in cut hooks right here to screw into the top portion of the door where you can't see it. We're using a 3/32 drill bit. Actually drill the pilot holes to screw a box into. And when we're all done, we'll unscrew them and we'll just cut up those holes in the end when we're all done. This is how we'll be spraying our drawers and door fronts right here. Got hanger and our hooks right there. [Music] So, we got our rack set up. This is where we're going to be spraying right here. We got our stand made out of PVC pipe hangers. Install our hooks on our doors so we can hang them and begin spraying them. Here's this is our spray booth. We've got our little opening that will be passing it out into the kitchen. Here's some of the doors. The sprayer is set up outside of our spray booth so it doesn't get contaminated and the filter doesn't get too clogged. And then we're going to be passing and walking the doors out of the kitchen to the other side of this wall and hanging them on our hanger. So you can see everything's

Auto-generated from the video audio.