Prime and Paint First Color

did is we actually rolled a flat and it's a P2 gray primer, flat primer on the wall from Sherwin Williams. We rolled that primer on the wall and that dried in about 20 minutes. And then after that, we determined the height that we wanted our chair rail stripe to go to. And it's typically right around the 3T 4T mark. But you're going to just go around with a tape measure, drop it to the floor, and just put little marks around your room at the height that you want your stripe to be, and put those marks about 2 in above where you want it to be. And those little marks are going to be a reference point that you're going to take the dark blue up and paint beyond where the stripe is going to be. So that dark blue's got to be painted up about this high. So we went around the room and with the P2 primer, the dark blue covered in one coat. And so after that was dry, it dries about two hours,