Spray Pattern and Overlap Techniques

3:35

12:28

620.6K views

At 3:35 in

How To Paint A House With An Airless Paint Sprayer

Watch on YouTube

What happens here

Maintain a consistent spray pattern. As you move the spray gun, overlap each new pass by approximately 50% with the previous pass to ensure even coverage. There are two primary techniques for triggering the spray gun: (1) Releasing the trigger: For optimal paint saving, release the trigger at the end of each pass. This is especially useful for smaller areas or when precise paint conservation is desired. (2) Continuous spray: For maximum speed, keep the trigger held down throughout multiple passes. This method is faster but may use slightly more paint. Observe the paint as it hits the siding. You should see a consistent, even coat. It's generally better to apply slightly too much paint than not enough to ensure full coverage and durability.

Goal: Achieve even coverage and control paint usage.

Tools and materials

Airless Paint Sprayer with Extension — Applying paint with control

What they say

(1,809 characters)

Hide

then another tip is when you're starting I'm going to start my my spray pattern I'm gonna start spraying here and end over there and if you want to save paint it's good to release your trigger each time if you're just going for speed you can keep your trigger held the whole time and I'll show you both techniques but here we go let me show you what it looks like so I'm down low playing up now as you notice I don't even have to walk back and forth because of my long extension I got a fence here so that kind of limits me from standing back far enough but it still works with a 30 inch extension if I fence was really close I just put a shorter extension on they switch really easily they don't have to be tighten with a wrench they're just hand height extensions and so that that's what it looks like spraying you'll releasing your trigger now do it without releasing my trigger and then the other tip is as you're spraying just overlap 50% as you're going up so you get really good coverage so here we go trying to keep it up at an angle so they've had a spit and that's kind of common she does not spit and just to clear that spit out I just take reverse my tip that's one thing nice about these tips is are reversible I can reverse it clear it and then it'll start spraying again so let's start again so you can see that now a tip is when I'm spraying it's like how fast you go when you're spraying and watching that paint come out I'm watching it hit the siding and and with enough experience you can see it hitting and you can see kind of about how much is getting on there and I want to just slow down enough that I'm getting enough pain it's better to get too much paint than not enough paint so you definitely want to go slow enough that you get enough paint on your surface so you can see how fast

Auto-generated from the video audio.