Skip to main content
Stesso

Identifying Logical Start and Stop Points

2:28
12:28
620.6K views

At 2:28 in

How To Paint A House With An Airless Paint Sprayer

Watch on YouTube

What happens here

When spray painting, it's crucial to select logical start and stop points for each pass. This means identifying natural breaks in the siding, such as corners or the ends of individual planks. Avoid starting or stopping in the middle of a flat, open section of siding, as this can lead to visible 'lap marks' or heavy paint buildup that will become more prominent over time as the paint weathers differently. By starting and stopping at consistent, logical points, you ensure a cleaner, more uniform finish.

Goal: Choose strategic start and stop points to prevent lap marks.

What they say

Hide

Instagram and Facebook so here we go I'm going to show you give you some tips and tricks now spraying when spraying your typical you want to find some nice into end section so I got I can go start and stop right here so I don't want to start and stop in the middle of the field right here because it will give me a lap mark or a heavy mark right in the middle of field in and you may not see it now but years down the road you'll see it because it weathers a little bit differently so I'm going to look for some logical start and stop point so let's start here and end here so I'm going to go back and forth over here from start stopping here and here or here and over there so this is a really good start to stop point that I've chosen right here right here on this side of the house you start at that point we got right here this piece of trim right here and there another

Auto-generated from the video audio.