Reassemble the Cleaned Filter

2:24

9:19

106.2K views

At 2:24 in

How to clean & rebuild a Graco Contractor II gun. Graco Sprayer Tips.

Watch on YouTube

What happens here

After cleaning the filter, reinsert it into the gun housing. Screw the housing back into the gun by hand until it's snug. Then, use the integrated trigger guard tool to securely tighten the filter housing. Finally, return the trigger guard to its original, locked position.

Goal: Securely reinsert and tighten the cleaned filter back into the gun.

Tools and materials

Graco Contractor II Spray Gun Graco — The main tool being reassembled
Integrated Trigger Guard — Tightening the filter housing

What they say

(800 characters)

Hide

paint jobs. That filter just it's no tools. It just sets back in and then the gun will spin and it spins back down till it gets to the height of that catch and then the catch will fit in. There's a little notch that actually fits in there. And to fit in that notch, now you can use your tool, your trigger guard to actually tighten it back up. Just tighten that good and snug. Put your trigger back guard back on. And that gun is ready to go again. Very important to keep keep that filter clean. Keeping the filter clean keeps the pressure up as high as it's supposed to be. If the filter starts to get clogged, you start to lose pressure and it won't spray properly. You'll start to get fingering and other issues and you'll start to get spits. So, make sure you clean that filter. Another thing you

Auto-generated from the video audio.