Check Oil Level and Finalize

What happens here

After refilling the oil, start the Gator and let it run for approximately 30 seconds to circulate the new oil throughout the engine and fill the oil filter. Turn off the engine and allow a few minutes for the oil to settle back into the oil pan. Locate the dipstick (often yellow), pull it out, and wipe it clean with a rag. Reinsert the dipstick fully, then pull it out again to check the oil level. Ensure the oil level is reading full on the dipstick. Once the oil level is confirmed, remove the jack stands and floor jack, and drive the Gator off the ramps. Clean any tools used and store them properly.

Goal: Verify correct oil level and store tools