Lay Out and Mark Deck Footings

8:56

34:54

220.6K views

At 8:56 in

How to Build a Simple Deck

Watch on YouTube

What happens here

After ground excavation, the layout for the deck begins. The existing small concrete patio is integrated into the design, and the goal is to extend the deck outwards. A tape measure is used to establish the desired distance from the house, and spray paint marks the outer perimeter. Wooden stakes are driven into the ground, and string is run between them to define the edges of the deck. A string level is attached to the string line to ensure everything is perfectly level. The squareness of the layout is confirmed by measuring diagonally from corner to corner.

Goal: The deck's perimeter and footing locations are marked using a tape measure, spray paint, stakes, and string to ensure squareness and proper alignment.

Tools and materials

Hammer
Spray Paint
String Level
String Line
Tape Measure
Wooden Stakes

What they say

(743 characters)

Hide

deck out first thing we need to do is figure out how far from the house we need it put our stakes in make sure the thing is square and then we can start [Music] digging and I bought a special tool that is perfect for this so it's a little level for your string so we could just get this nice and tight hanging on there and it'll tell us which way we need to go pretty dead [Music] [Applause] nuts in order to get the right Square for it you don't measure side to side you measure across so from corner to corner we're about 2002 uh I think I'm feeling good about it with fun about this uh that I just realized is because the elevation is so low to this curb here I don't even think we're have to put steps I think this will be enough of a step

Auto-generated from the video audio.