Optimize Spray Angles

shooting down at a downward angle to hit that. So, I'm shooting down, shooting at an upward angle to hit that. Some people will say, "You're, aren't you supposed to have, you know, your um gun square to the surface while you're spraying and not arcing? There's a time and a place for everything." And arcing is not going to cause issues. Yeah, in uh theory you want to have it square, but the arcing, not an excessive arcing. Throwing overspray everywhere is not going to be a big deal. When you're using extensions, you can see it spits. Um that's the nature of extensions, but you'll never see the spits on exterior siding. It never matters unless you're spraying something fine finish like trim, cabinetry, furniture, etc. So, I'm hitting this