Prepare EP-55 Epoxy Primer Components

0:56

3:41

9.7K views

At 0:56 in

How Painters Can Epoxy Garage Floors Without Expensive Equipment

Watch on YouTube

What happens here

Carefully remove the lid from the larger bucket containing Component A of the Citadel EP-55 Water Based Epoxy Primer. Next, open the smaller container of Component B (the hardener) and slowly pour its entire contents into the larger bucket. Ensure that all of Component B is transferred to maintain the correct mixing ratio, which is crucial for proper curing and performance of the epoxy primer.

Goal: Begin by preparing the two components (resin and hardener) of the Citadel EP-55 Water Based Epoxy Primer for mixing. This involves carefully opening the containers and pouring the hardener (Component B) into the resin (Component A) bucket.

What they say

(450 characters)

Hide

we've applied and we're still we're not 100% done, but I'm going to talk a little bit about, you know, those products. So the first product we applied was a primer. So we came in, pressure wash, clean the floor. We primed it with EP55. So that's a primer kind of a system you can use, you know, instead of acid etching, grinding and stuff. So it it works extremely well. Then we uh waited a day, came back, and then we did our first flake coat, which

Auto-generated from the video audio.