Mix EP-55 Epoxy Primer with Drill Mixer

0:57

3:41

9.7K views

At 0:57 in

How Painters Can Epoxy Garage Floors Without Expensive Equipment

Watch on YouTube

What happens here

Attach a Jiffy mixer paddle to a corded or cordless drill. Insert the paddle into the combined EP-55 epoxy primer components (A and B). Begin mixing at a slow to medium speed, ensuring the paddle reaches the bottom and sides of the bucket to incorporate all material. Mix continuously for approximately 2-3 minutes, periodically scraping the sides and bottom of the bucket with the mixer paddle to ensure no unmixed material remains. Proper mixing is vital for the epoxy to cure correctly and achieve its intended performance. Avoid mixing at high speeds, which can introduce excessive air bubbles into the mixture.

Goal: Thoroughly mix the combined resin and hardener components of the EP-55 primer using a drill mixer with a Jiffy paddle to ensure a homogeneous and consistent mixture.

Tools and materials

Chemical-Resistant Gloves
Corded or Cordless Drill
Jiffy Mixer Paddle
Safety Glasses
Mixed EP-55 Primer

What they say

(450 characters)

Hide

we've applied and we're still we're not 100% done, but I'm going to talk a little bit about, you know, those products. So the first product we applied was a primer. So we came in, pressure wash, clean the floor. We primed it with EP55. So that's a primer kind of a system you can use, you know, instead of acid etching, grinding and stuff. So it it works extremely well. Then we uh waited a day, came back, and then we did our first flake coat, which

Auto-generated from the video audio.