Skip to main content
Stesso

Evaluating Trailer Frame Construction: Tubing vs. I-Beam

12:00
17:49
651.8K views

At 12:00 in

How NOT to Buy a Dump trailer! RED FLAGS & how Cheap Trailers CUT Quality pt 1/2 . 4 k video

Watch on YouTube

What happens here

This segment highlights the critical importance of evaluating the trailer's frame construction, specifically comparing the use of box tubing versus I-beam structures. Box tubing, with its four enclosed sides, is described as being torsionally more rigid and providing superior support compared to an I-beam, especially when considering equivalent sizes. However, it's emphasized that not all I-beams or tubing are created equal; wall thickness and the weight per foot of the material are crucial indicators of strength and durability. The goal is to find a smart design that offers sufficient strength without excessive weight, as heavier frames reduce the trailer's usable payload capacity.

Goal: Understand how frame material and construction affect trailer strength and payload capacity

Tools and materials

  • Dump Trailer — Illustrating a trailer with a box tubing frame, known for its torsional rigidity
  • Steel I-Beam N/A — The structural material of the trailer frame
  • Steel Tubing N/A — The structural material of the trailer frame

What they say

Hide

you use tubing for the framework correct so that's structurally as strong as an i-beam yes or no depending on the weight of the i-beam and that's where you got to be careful because not you know a lot of guys may do eight or ten inch Eyebeam but not all I beam is created equal just like this tubing there's different thicknesses of it that are gonna give you the value and strength that you're looking at so so box tubing there's four sides to it so torsionally it is more rigid and some provides more support than that of the I well that's gonna depend on the weight and the structure of that so we use you know six inch tubing it's a 3/16 thick you got to be careful because some guys may use an eighth so that's the things that you really got to look at is not all the sizes are created equal because there's a thickness value that comes into play as well so the 8 inch I beam after running a 10 or 15 pounds per foot it's gonna be a little bit more support than you're gonna get out of the tube in terms of the overall strength but part of suretrack is just having the smart design do we need to over-design a

Auto-generated from the video audio.