Skip to main content
Stesso

Introduction to the Bender and Project Goal

0:02
1:56
2.7M views

At 0:02 in

How Electricians Bend 1 1/4” EMT Conduit,💪 and it’s not that Easy🤯 #electrician

Watch on YouTube

What happens here

The video introduces the task of bending a 1.25-inch conduit, explaining that the process is similar to bending smaller conduits but requires a larger bender. The instructor points out key features on the conduit bender: an arrow used for marking and aligning, and a 'back 90 star' which helps indicate a 90-degree bend. The goal for this demonstration is to create a 90-degree bend at the end of the conduit pipe.

Goal: Understand the conduit bender's features and the bending objective.

Tools and materials

  • 1.25-inch Conduit Bender — Bending the 1.25-inch electrical conduit
  • 1.25-inch Electrical Conduit — The material to be bent

What they say

Hide

okay you got it Hey Dad how do you bend inch and a quarter conduit so inch and a quarter conduit is the same as any other conduit right just a bigger Bender okay it's pretty much the biggest conduit you can bend manually got on this side we've got the arrow right and then we've got the back 90 star okay so what do you want to do uh just like a 90 90° okay 90° Bend what I like to do if I'm just making a 90 on the very end of the pipe go approximately 2 in beyond the shoe

Auto-generated from the video audio.