Skip to main content
Stesso

Install Casters

0:58
1:32
930 views

At 0:58 in

@harborfreight welding table modification #1. subscribe for more!

Watch on YouTube

What happens here

Insert the threaded stem of each caster through the prepared hole in the table legs. On the inside of the leg, secure each caster using a flat washer, a lock washer, and a nut. Tighten the nut firmly with a wrench or, as shown, water pump pliers if a wrench doesn't fit, ensuring the caster is securely attached but still allows for rotation. Repeat this process for all four table legs.

Goal: Securely attach casters to all four table legs.

Tools and materials

  • Flat Washers — Distributing the load of the nut and providing a smooth surface
  • Lock Washers — Preventing the nut from loosening under vibration
  • Nuts — Securing the caster stem to the table leg
  • Threaded Stem Casters — Allowing the table to be moved easily
  • Water Pump Pliers — Tightening the nuts in tight spaces

What they say

Hide

washer, lock washer, nut, tighten. Repeat on all four sides. I can't get a wrench in there, so water pump pliers. Tighten and roll. I'm going to have to add a little bit

Auto-generated from the video audio.