Skip to main content
Stesso

Clean the Faucet Threads

1:25
5:30
101.3K views

At 1:25 in

GREAT LITTLE HOSE BIB HACK!

Watch on YouTube

What happens here

After removing the vacuum breaker, inspect the faucet threads for any remaining red threadlocker residue. It's important to remove this residue to ensure a proper seal for the new fitting. The presenter uses the back end of a utility knife blade to carefully scrape off the old threadlocker. A wire brush is also suggested as an effective alternative for cleaning the threads.

Goal: Remove old threadlocker residue from the faucet threads

Tools and materials

  • Utility knife — Scraping off threadlocker residue using the back of its blade
  • Wire brush — Alternative tool for cleaning threadlocker residue

What they say

Hide

easy to take off if you look down in there right there you can see that is red loctite essentially that's thread locker okay we're not going to worry about it with this because we're alleviating this but we do want to get it off here we want to make sure we get all that stuff out of there at least as much as we can take either a wire brush or if you're like me and you forgot your wire brush or you just like doing extra work then you know i just usually will take the blade or the back end of my blade of a utility knife it came off all pretty quick pretty easy right most of it actually stayed in there i think which is good so we've got the majority of

Auto-generated from the video audio.