Skip to main content
Stesso

Reassemble and Lubricate

0:57
1:59
37.2K views

At 0:57 in

Graco Airless Paint Sprayer Filter Removal. DIY Paint Sprayer Hacks.

Watch on YouTube

What happens here

Place the cleaned or new filter back into the housing opening. Before screwing the housing cap back on, apply a small amount of packing lubricant around the threads of the housing. This lubricant helps prevent paint from drying and sticking to the threads, making future removal easier and ensuring a good seal. Screw the housing back on by hand, tightening it just enough so it's secure and won't leak. It does not need to be tightened with a wrench.

Goal: Secure the filter and prevent future sticking

Tools and materials

  • Graco 695 Sprayer Graco — The equipment being reassembled
  • Packing Lubricant — Lubricating the threads to prevent paint from drying and sticking

What they say

Hide

going to stick it down inside. And then I I like to take around my threads right here. I like to take some some packing lubricant and put it around these threads just so any paint doesn't dry on there and glue that on there. There's any debris or anything like that. It always keep them loose and keep it so it's just handtight. Just going to put it back on. Screw it down.

Auto-generated from the video audio.