Skip to main content

Loading Equipment and Fueling Up

8:30
18:46
72.8K views

At 8:30 in

Going Mowing - Learning the ropes.

What happens here

The crew loads the equipment onto the trailer, preparing for transport to job sites. The creator also details his technique for filling fuel cans at the gas station. Since he needs to mix 2-stroke oil with gas, he uses the gas pump's nozzle output to accurately measure the two gallons of regular fuel needed for his mix, ensuring the correct ratio for engine longevity. He highlights this as a trick to prevent forgetting to add the oil and potentially damaging engines.

Goal: Load all equipment and accurately mix fuel for 2-stroke engines.

Tools and materials

  • Fuel Pump Nozzle Holiday — Dispensing gasoline
  • Trailer Road Trail — Transporting equipment
  • 2-stroke Oil HP Ultra — Mixing with gasoline for 2-stroke engines
  • Fuel Cans — Holding and transporting gasoline and mixed fuel
  • Regular Unleaded Gasoline Holiday — Fueling 2-stroke engines (after mixing with oil)

What they say

Hide

out getting gas okay the easiest way I got to do premix the easiest way to do this since in my my container I already have some gas I'm going to just use the I got to only mix two gallons at a time right but I have gas in here so I'm going to use the output on the the nozzle to tell me when I hit 2 gallons that way I'm going to be accurate with my mix so that's a good way to get it done you know what seems to happen I just pulled the fuel tanks out of the back of the Mustang here and you spill fuel all over that I do that on purpose I don't spill fuel in the back of my Mustang but what I do is I leave the top off the mix the the fuel that I need to mix because I always seem to forget to get back to the yard or get back to the job site to actually put the mix in so I learned I got to do something to remember so I just let the let the top kind of jiggle on there a little bit keep it Loose cuz I'll tell you what I would rather dump two gallons of gas on the ground than to burn out my engines because I forgot to stick this in here so one of the little tricks maybe it'll help you guys what do you guys do put it in the comments how do you know what you know what else I want to know how do you guys strap down cuz I still haven't figured that crap out takes me forever takes me longer to strap down than it does for me to get a job done all right let's fire up this Echo SRM 225 let's start whacking some weeds all right let's see how this hasn't been ran yet today so Yeehaw third pull not bad I'll take a three puller I'll do three pulls any day let's see can I whack weeds and vide tape oh Rob let's see how did we get around here y all know starting to drizzle we're starting job number two starting to rain St to rain stop a keep going not raining that bad what's a little Dill will hurt long as the grass doesn't Clump up I want to show you something something we do I know you guys probably do it but this is the order that we do all these jobs we have it all routed and scheduled that way we can Buzz around from one to the next to the ne see what we got to do grab a trimmer and go touch up some [Music] edging got to be careful when it's wet like this you kind of tend to skin the grass on these Zero Turns not ideal see what height he's mowing at we don't want to go too y all right take a tour of this property we're going to do for this gal blow off her deck it's got a bunch of

Auto-generated from the video audio.