Skip to main content
Stesso

Constructing the Shelf Base and Supports

0:09
0:59
3K views

At 0:09 in

Garage shelves done

Watch on YouTube

What happens here

The creator explains that the shelves were constructed using self-made wooden brackets for support. These brackets are secured to the wall, and 1/2 inch plywood was used to create the main flat surface of the shelf.

Goal: Build the foundational support structure and primary surface for the shelf.

Tools and materials

  • Drill — Drilling pilot holes and driving screws
  • Stud Finder — Locating wall studs for secure bracket installation
  • 1/2 inch Plywood — Forming the main horizontal surface of the shelf
  • Wood for Brackets — Creating the structural supports for the shelf
  • Wood Screws — Attaching brackets to the wall and plywood to brackets

What they say

Hide

Did you know that there's over 240 different kinds of stains and I used one of them? I used dark walnut on the shelf. But anyways, the shelf is done. Uh yeah. So, basically, I made those brackets like you guys saw, and then I took 1/2-in plywood, and I put that on the top, and then I took 1x4s, and I just wrapped the shelf to make it look all fancy and stuff. So, shelf's done. It's 24-ft. It fits 14 totes. Well,

Auto-generated from the video audio.