Remove Old Saddle Valve and Pipes

that turned out really nice. Now we're going to start on the water. Let's disconnect the poly tubing that goes to the fridge from the saddle valve. The these saddle clamps are nothing but trouble. You can see that it's leaking. It's rusted. And putting dissimilar metals together like this is only going to create a bigger issue. So this little Milwaukee cutter right here has been one of my favorite new little cool tools. just works really well. We got to stop putting freaking steel discussions on copper pipe. Like that should never be. There we go. I'm going to tuck this quarter inch tubing down in the hole a little bit to give myself some space to solder. Sometimes the paint's too thick