Skip to main content
Stesso

Install Subsequent Cleat Rows

0:53
1:14
86.4K views

At 0:53 in

French cleat wall

Watch on YouTube

What happens here

After the first row is secured, cut 12-inch spacer blocks from scrap wood. Use these blocks to establish consistent vertical spacing for subsequent cleat rows. Place a spacer block on top of the installed row, then position the next cleat strip directly above it. Secure the second and third rows using the same nail-and-screw method as the first. Repeat this process for all desired rows and on any other wall sections where the French cleat system will be installed.

Goal: Add additional rows of French cleats with consistent spacing

Tools and materials

  • 12-inch Spacer Blocks Homemade — Ensuring consistent vertical spacing between cleat rows
  • Finishing Nailer — Temporarily securing the cleats
  • Finishing Nails — Initial fastening
  • Impact Driver — Permanently screwing the cleats to the wall
  • Stained Cleat Strips — The strips for the second and subsequent rows
  • Wood Screws — Permanent fastening of the cleats

What they say

Hide

This is going to sit just like this. So, I'm throwing this up with finishing nails first and then we'll come back through and we'll screw it all in. Got the first row on. I cut these 12-in spacer blocks for here. Now, I'm going to put the second row on and then we're going to go up a little higher. We're going to do a third row and then we'll do the same thing on our side. I just went ahead and made this super simple mount here. You got piece of your French cleat on the back, 1 by 4 on the front. I dropped two screws in it. Clips on there. Now, you can hang stuff. I got some

Auto-generated from the video audio.