Skip to main content
Stesso

Reconnect Supply Line and Test

3:12
5:59
86.3K views

At 3:12 in

First Thing To Check With Low Pressure On One Side Of Your Faucet

Watch on YouTube

What happens here

Reconnect the supply line to the faucet connection port. First, hand-tighten the nut by turning it clockwise. Then, use the adjustable wrenches to give it a final tightening, typically no more than one full turn past hand-tight. Turn the water on at the faucet and then test the cold water handle. The flow should now be restored.

Goal: Restore water flow and confirm the repair

Tools and materials

  • Adjustable Wrench

What they say

Hide

Good rock and roll there. We can go ahead, let's hook this back up. We're not going to have to take this off anymore. I like to go hand tight with these and then no more than one full rotation tightening with the wrenches. All right, so blowing water in our bucket, I didn't really see anything in there. I mean, there very well could be something in there that caused this. But I guess there's a couple little particles of something in there. But I don't know. I did not see anything in our little Tupperware container here that could have been that. But look at that. That is, but that is just as good as that now. So it's all back up and running.

Auto-generated from the video audio.