Skip to main content
Stesso

Screed the Sand Bed

5:14
13:41
118.2K views

At 5:14 in

FINISHING the Raised Paver deck & curved staircase- "the Scooby Project" pt2

Watch on YouTube

What happens here

Carefully spread paver sand across the patio area, ensuring it covers the screeding pipes. Use a screed board (or a straight piece of wood) to pull across the screeding pipes, leveling the sand to a uniform depth. Remove the screeding pipes once the sand bed is perfectly level. The goal is to have a thin, consistent layer of sand (approximately 0.75 to 1 inch deep) to allow for slight adjustments during paver placement without significant settlement.

Goal: Create a level and consistent sand bed for paver installation

Tools and materials

  • Metal Pipes — Used as screeding rails to set sand depth
  • Screed Board — Leveling the sand across the screeding pipes
  • Shovel — Spreading paver sand
  • Trowel — Smoothing the sand surface after screeding
  • Paver Sand Sakrete — Creating a level bedding layer for the pavers

What they say

Hide

that all leveled out so we only want three quarters to one inch of sand so he will go right to the top of that pipe so as he lays this sand out you'll see that he uses that as his indicator um if he needs to go up higher then the sand has to come out more class five has to go in you can't cheat and add fill that whole thing up with sand because it just tends to move it tends to without the binding agent it can shift so if you look closely as he's doing this look between the bricks themselves do you see right there what i was saying earlier when he was putting the styrofoam in in the corner is all those nooks and crannies have to be filled because if those nooks and crannies aren't carefully filled up right here that is a wide open invitation for all of the rocks to slide and shift in and that can create a settlement issue

Auto-generated from the video audio.