Compacting and Sweeping Jointing Sand
At 10:45 in
FINISHING the Raised Paver deck & curved staircase- "the Scooby Project" pt2
What happens here
Once all pavers are laid, spread jointing sand (also known as polymeric sand) evenly over the entire patio surface. Use a push broom to sweep the sand into all the gaps and joints between the pavers. Ensure the joints are completely filled. Next, use the plate compactor (with a rubber mat attached to the bottom plate) to compact the pavers again. This vibrates the sand deeper into the joints and helps to lock the pavers in place. After compaction, sweep more sand into any remaining unfilled joints. Finally, lightly mist the patio surface with water according to the polymeric sand instructions to activate its binding agents, which will harden and lock the sand in place.
Goal: Lock pavers in place and fill joints for a stable finish
Tools and materials
- Garden Hose with Sprayer — Lightly misting polymeric sand to activate
- Plate Compactor Tomahawk — Compacting the pavers and vibrating sand into joints
- Push Broom — Sweeping jointing sand into paver gaps
- Rubber Mat — Attaching to the compactor to protect paver surfaces
- Jointing Sand — Filling paver joints to lock them in place and deter weed growth
What they say
(1,237 characters)Hide
What they say
(1,237 characters)Auto-generated from the video audio.