Prepare Equipment and Paint

What happens here

While not explicitly shown in the video, the spray gun must be properly set up and the paint prepared before application. For an HVLP (High Volume, Low Pressure) spray gun, like the one appearing in the video, connect it securely to an air compressor using an air hose. Adjust the air pressure and fine-tune the spray pattern on the gun according to the paint manufacturer's recommendations and your specific equipment. Critically, prepare your paint by thinning it with the appropriate solvent (water for latex/water-based paints, or a specific thinner for oil-based/lacquer paints) to achieve the correct viscosity for spraying. Always use a paint filter to strain the paint through a fine mesh, removing any debris or dried paint particles that could clog the nozzle and disrupt the spray pattern.

Goal: Ensure the spray gun is correctly configured and the paint is ready for application.