Verify Fan Pattern Control

3:56

4:34

881 views

At 3:56 in

Fan Control | Troubleshooting Issues With the 77000 Atomizer Spray Gun

Watch on YouTube

What happens here

Once the spray gun is fully reassembled with the air distributor plate correctly oriented, it's time to verify the fix. Test the spray gun to ensure that adjusting the fan control knob or ring now provides the full range of fan pattern widths, from a round pattern to a wide fan, as expected. This confirms that the airflow is correctly distributed and the adjustable fan controls are working properly for detailed painting applications.

Goal: Test the spray gun after reassembly to confirm that the fan width control is fully functional.

What they say

(785 characters)

Hide

bit on the wrench not too much and now when you put the gun back and you go back to spray you'll have your full fan width control and be able to have all the different widths of fan pattern including your round pattern yep so there you have if you've ever run into that problem like I have and now you understand you know how to resolve it you understand how to install the distributor plate air distribut PL air distributor plate 12 and six is um something an easy way for me to remember to install it correctly every single time so I don't have to tear it apart and reinstall it if you got any questions or comments about this video just leave it down in the comment section below we'll try to answer them as soon as we can and we'll see you next time right here on paint Life TV out

Auto-generated from the video audio.