Identify the Problem and Key Components

all right today I'm here with John we're going to be talking about the atomizer 7700 gun and kind of um you know something that happened to me that was a problem and we're going to talk about how to fix that problem if you ever run into the same thing now we have um inside you know the you know front of this gun kind of a nylon gasket or something we call it a fan distributor plate air distributor plate an air distributor plate now you know I put everything back together I went to start spraying and I was just spraying a circular pattern and I'm like what the heck and I started a adjusting my fan control knob um or ring right here and it didn't do anything and so I knew something was um not together right I eventually you know went um broke out the manual read the manual figured out what was going on every time I would like clean the gun put it back together I kind of like you know struggled with this in the beginning youo which way does this um plate go in and you came up with something very simple that you know worked for me and um kind of just resonated with me 12 and six so can you um show us you know if you run into that issue how to resolve it yeah it's a real real common uh problem for sure uh when you're reassembling the gun especially for those people that aren't familiar with it and just purchased it so let's run through it so the part we're talking about is actually buried underneath all of the air distributor so we need to remove the nozzle and pull that whole assembly off so we got the nozzle the air distributor and here's where we have the fan control ring and the air distributor plate so