Clear Clogged Spray Nozzle and Final Test

What happens here

After addressing the pump connection, the lubrication system is tested again. If a leak persists at the spray nozzle, or if the spray is inconsistent, it might be due to a clogged nozzle. Use compressed air (by blowing into the line) or a small, thin wire to clear any debris from the nozzle tip. Then, carefully tighten any remaining loose clamps on the lubrication line to ensure a complete seal. Once the leaks are resolved and the spray is consistent, fill the lubrication tank with winter windshield washer fluid to prevent freezing in cold weather.

Goal: Ensure proper, consistent lubricant spray and winterize the system.