Skip to main content
Stesso

Power Wash the Floor

9:09
9:59
375K views

At 9:09 in

Epoxy Floor Acid Etching. Step 1 To Epoxy A Garage Floor. Epoxy hacks & Epoxy instructions.

Watch on YouTube

What happens here

The presenter attaches a turbo nozzle to his pressure washer. He explains that a turbo nozzle and a pressure washer with at least 3000 PSI are ideal for thoroughly cleaning the pores of the concrete, removing all concrete dust and silt created by the acid etching. This ensures maximum adhesion for the epoxy. He proceeds to power wash the entire floor.

Goal: Deep clean the concrete pores to remove all etching byproducts

Tools and materials

  • Garden Hose — Connecting to the pressure washer
  • Pressure Washer — High-pressure cleaning of the etched floor
  • Safety Glasses — Eye protection
  • Turbo Nozzle — Enhanced cleaning and etching byproduct removal
  • Water — Power washing

What they say

Hide

process. So I'm done. Now I'm done with this rubber hose here. I'm just going to hook this hose of water up to my power washer and begin the power washing process. So, this power got my nozzle here. This is a turbo nozzle right here. That's a rotating nozzle. And these nozzles are really good for really etching the concrete and stripping stuff off this concrete and cleaning it. There's going to be a lot of concrete dust and stuff created uh and silt created by the matic acid. So, you really got to get that out of the pores of the concrete. And the only way to do that is a turbo nozzle and then a pressure washer that has at least 3,000 PSI. I got my pressure set up, pressure washer set up out here. So, here I go. I'm going to get ready. One more thing, don't forget to check out my clothing line, Paint Life Paintware, where you can purchase my t-shirts and hats to help support the making of new videos. And thank you for watching my videos.

Auto-generated from the video audio.