Power Wash Etched Surface

splatter acid up in my face. Now I got my acid tools all tool cleaned up. Now I'm going to begin the power washing process using a turbo nozzle. Cleaning this thing out really good. And that's also going to help the etching process. So I'm done. Now I'm done with this rubber hose here. I'm just going to hook this hose of water up to my power washer and begin the power washing process. So, this power got my nozzle here. This is a turbo nozzle right here. That's a rotating nozzle. And these nozzles are really good for really etching the concrete and stripping stuff off this concrete and cleaning it. There's going to be a lot of concrete dust and stuff created uh and silt created by the matic acid. So, you really got to get that out of the pores of the concrete. And the only way to do that is a turbo nozzle and then a pressure washer that has at least 3,000 PSI. I got my pressure set up, pressure washer set up out here. So, here I go. I'm going to get ready. One more thing, don't forget to check out my clothing line, Paint Life Paintware, where you can purchase my t-shirts and hats to help support the making of new videos. And thank you for watching my videos.