Install Plow Mount and Electrical Connections

further as he's going. All right, I got the plow mount on there. I'm just getting [music] all the wiring uh plumbed up. I'll zip tie all this stuff up once I get the bumper on there and figure out where I want to put it. But pretty straightforward. Power wire runs through here up to the up to a selenoid to the battery. And then the light [music] harness has some relays on there that plug into the factory 16 pin that comes down, plugs into [music] the plow right here. And then this is the [music] controller side that just goes up. Snuck it along here. connects to the battery with a fuse and then it goes through the factory firewall ran it [music] up under here. Hard to see in the dark. Yeah, ran it up over here. That's where the plug goes, but pretty [music] clean install. Had to tap this red wire into a fuse. Now that everything on that side of things is done, we'll go ahead and start putting this front end back on. You had to pull the headlights, [music] the grill, and the bumper as well, too, to get access to everything, especially to [music] kind of tuck the wires back here. This is a good spot to uh tuck them. So, need to get those headlights out to get to that.