Running Conduit and Installing Junction Box

0:20

1:01

15K views

At 0:20 in

Electrician Installs a 24 AMP Tesla Charger in Customer’s Home, Would you get an EV? #electrician

Watch on YouTube

What happens here

The installer demonstrates the physical routing of the electrical wiring. He shows that 1/2-inch Electrical Metallic Tubing (EMT) conduit was run neatly down the wall from the Tesla Wall Connector to a junction box located on the ceiling. This conduit protects the wires and ensures a safe and compliant installation.

Goal: Safely route electrical wiring using conduit and connect to a junction box.

Tools and materials

1/2-inch EMT Conduit — Protecting and routing electrical wires from the charger to the electrical panel
Junction Box — Providing an enclosure for electrical wire connections and transitions

What they say

(371 characters)

Hide

amp panel over there. There is certain limitations when you install these chargers and we had to derate the charger down because of the load calculation. So, as you can see, we ran 1/2 in conduit all down nice and low entow you see our box. We ran eight gauge guys for this 30 amp charger because, you know, these are continuous loads. It's always better to oversize than

Auto-generated from the video audio.