Skip to main content
Stesso

Run Interior Sump Pump Electrical Line

5:29
8:25
16.3K views

At 5:29 in

ELECTRICIAN FIXES TRIPPING CIRCUIT FOR CUSTOMER, AND TOOK 2 DAYS TO FIX!

Watch on YouTube

What happens here

Once the exterior conduit is installed, the electrical line (Romex cable) is run from the attic down to the sump pump location in the basement. This involves drilling into wood joists and studs to route the cable through the framing, adhering to electrical code which requires new Romex work to be run above studs. The electrician uses a drill with a long bit for this purpose, guiding the cable through the drilled holes.

Goal: Route the dedicated electrical cable from the attic to the sump pump location in the basement.

Tools and materials

  • Drill — Drilling holes through wood framing for cable routing
  • Long Drill Bit — Drilling through thick wood members or multiple studs/joists
  • Romex Cable — Providing electrical power to the new sump pump outlet

What they say

Hide

the sum fix as well here guys I'm actually running the electrical line now for the sump Outlet so I'm drilling into the woods guys and I'm running my Rx it's code guys to actually run the Rox above the studs because it's technically new work so we are actually running the RX all right so we now have our new outlet for the sump the sump right everybody so new outlet for the sump on its own dedicated circuit we ran the line going up and then going outside the house because the whole point was to avoid cutting

Auto-generated from the video audio.