Skip to main content
Stesso

Sanding the Door Surface

1:35
14:39
6.9K views

At 1:35 in

Effortless Door Spraying with the New PaintLine PSDRID Tool | Airless Sprayer Standing Technique

Watch on YouTube

What happens here

Thoroughly sand the door. For flat panel doors, which do not hide imperfections well, meticulous sanding is crucial. The presenter uses a dust-free sanding setup with a 3x4 sander connected to an Ekasand Vacuum System. He first sands existing patches using a Pad Saver with 220/320 grit FilmTek or Ekastorm abrasives. For general sanding of the door face, he uses a 1/2 inch open cell sponge abrasive (Ekasik) to avoid swirl marks, which can be visible on flat surfaces when using harder abrasives. This approach helps create a perfectly smooth surface for painting.

Goal: Achieve a perfectly smooth, prepped door surface for painting.

Tools and materials

  • 1/2" Ekasik Sponge Abrasive Ekasand — Sanding flat surfaces to prevent swirl marks
  • 220/320 Ekastorm Sandpaper Ekasand — Sanding patched areas with the Pad Saver
  • 220/320 FilmTek Sandpaper Ekasand — Sanding patched areas with the Pad Saver
  • 3x4 Sander — Power sanding the door
  • Door — The surface being sanded
  • Ekasand Vacuum System Unieda — Dust extraction during sanding, featuring HEPA filtration
  • Pad Saver — Attaching to the sander for flat sanding patched areas

What they say

Hide

sanding these doors we want to prep our doors it's essential to really sand these doors they're not like six panel doors with wood grain like we typically see where um you know it really hides imperfections and flaws these are flat panel doors that do not hide imperfections and flaws you can see right here this is where you know dog was you know scratch it on the door scratch the door up quite a bit so we going be standing it in my booth it's really nice cuz it's got a dustless uh sanding setup the 3x4 sander is out here with my Unita ecosand um vacuum out there we need a vacuum and it's a hepac it's hooked up there's almost zero dust when it comes to sanding when I'm doing doors I typically only use two abrasives I'll use a/2 inch open cell sponge abrasive just like this is going to attach right to the sander and if I have to do any flat sanding I'm going to be using a patch saver film Tech or ecostorm a 320 grit to do the sanding there so I'll usually typically you know either do 220 or 320 if I'm uh standing in between coats it's definitely a 320 sometimes it's 220 this store is in pretty good shape you front and back there's no imperfections on it at all I've already sanded this with the flat erases so now I'm just going to go over the whole door and sand it with a half2 inch sponge and you'll see what that looks like now so just to give you you a little discussion to you know you can't actually just prep all your doors without having them standing up you know I'm just doing it you know for purposes to show you you know in the booth I'm working in the booth so you can do them standing up you got to be careful and support them because you don't want to fold the thing back and you'll bust the the stands out so kind of holding on to it but sometimes might just be a little more convenient to you know sand them you know without having the Sands installed so and here's another just a little tip when it comes to doing any flat sanding now I talked about using film Tech so I'd be using film Tech to sand any type of Bondo or patches that I've done you

Auto-generated from the video audio.