Secure Spool and Reinsert into Trimmer Head

What happens here

Once the trimmer line is wound onto the spool, leave a short length of each line extended. Secure these extended ends into the small tabs on the outer edge of the spool. These tabs are designed to hold the line in place and prevent it from unwinding while you reassemble the trimmer head. Next, align the re-strung spool with the main trimmer head housing. Ensure the two extended lines are fed through the corresponding holes on the trimmer head. Push the spool firmly into place until it clicks, ensuring it's properly seated.

Goal: Secure the wound line and reinstall the spool into the trimmer head