Skip to main content
Stesso

Cleanup and Post-Application Steps

6:50
8:16
658.9K views

At 6:50 in

Drywall & Sheetrock Texturing Hacks. How To Spray Texture A Wall.

Watch on YouTube

What happens here

After the texture has sufficiently dried (typically overnight or for a day), carefully pull off all the masking tape and remove the drop cloths. Clean the texture sprayer by first running excess texture mud out into a clean 5-gallon bucket for potential reuse. Then, dump water into the sprayer's hopper and run it through the gun, using a hose for thorough cleaning until all components are free of mud. The newly textured wall should then be primed before painting.

Goal: Clean all equipment and prepare the textured wall for painting.

Tools and materials

  • 5-Gallon Buckets
  • Paint

What they say

Hide

then you want to paint it it's just about dry we'll be pulling it off coming back tomorrow to do the painting so now we're just cleaning our uh tech sprayer sprayer out we're just dumping some water in here we ran all the excess texture onto a clean five gallon bucket to be able to reuse it again and then now we're just uh dumped some water in there just switching around just clean it out it's really simple and easy to clean then you just run it through your hose your clean water through your hose and you're good to go and the spare is all clean [Music] well there you have it our texture job is all complete we're cleaning it up and we'll be back tomorrow to do the painting so hopefully you enjoyed this video

Auto-generated from the video audio.