Skip to main content
Stesso

Clean Texture Sprayer

6:55
8:16
658.9K views

At 6:55 in

Drywall & Sheetrock Texturing Hacks. How To Spray Texture A Wall.

Watch on YouTube

What happens here

After texturing is complete, thoroughly clean the Tech Spray texture machine. Start by running out any excess texture mud from the machine into a clean 5-gallon bucket, which can then be reused. Next, dump clean water into the hopper and run it through the machine and gun to flush out any remaining texture material. Continue flushing until the water runs clear. Disassemble any parts as needed for a more thorough cleaning. Proper cleaning after each use is essential to maintain the machine's functionality and prevent clogs.

Goal: Clean the texture spray machine thoroughly for future use.

Tools and materials

  • 5-gallon Bucket — Collecting excess mud and rinse water
  • Texture Gun Graco TexSpray — The part of the machine that needs flushing
  • Water — Flushing the machine and gun

What they say

Hide

painting so now we're just cleaning our uh tech sprayer sprayer out we're just dumping some water in here we ran all the excess texture onto a clean five gallon bucket to be able to reuse it again and then now we're just uh dumped some water in there just switching around just clean it out it's really simple and easy to clean then you just run it through your hose your clean water through your hose and you're good to go and the spare is all clean

Auto-generated from the video audio.