Skip to main content
Stesso

Understanding the Clutch and Driving Screws

0:04
1:17
27K views

At 0:04 in

Drill clutch explained

Watch on YouTube

What happens here

The video begins by introducing the drill's clutch settings, represented by numbers on the drill collar. These numbers determine the amount of torque applied before the clutch slips, preventing screws from being stripped or over-driven. To properly drive a screw into wood, start with the lowest clutch setting and increase it gradually until the screw is driven flush with the surface without causing damage.

Goal: Drive screws without stripping them or burying them too deep

Tools and materials

  • Cordless Drill Milwaukee — Driving screws and drilling holes
  • Screwdriver Bit — Engaging with the screw head to drive it
  • Screws — Fastening objects into wood
  • Wood — As a surface to drive screws into for demonstration

What they say

Hide

If your drill keeps stripping screws, you're probably using the wrong setting. Let's get after it. These numbers are your clutch, and it determines how much torque is applied before it starts slipping. So, when you're drilling, start with the lowest setting and bump it up until you get the screw where you want it. So, now when we drive this screw, it'll stop perfectly. Setting your clutch appropriately also works great for drywall, so you don't tear through

Auto-generated from the video audio.