Skip to main content

Adjust Clutch for Driving Screws

0:10
1:17
27K views

At 0:10 in

Drill clutch explained

What happens here

The presenter demonstrates the practical application of the clutch by attempting to drive screws into a wooden board. He advises beginning with the lowest clutch setting (e.g., setting "2") to prevent overtightening. If the clutch slips before the screw is fully driven, he instructs to incrementally increase the clutch setting (e.g., to "4") until the screw is driven perfectly flush with the surface without stripping its head.

Goal: Successfully drive screws flush without stripping by adjusting the clutch setting.

Tools and materials

  • Cordless Drill — Driving screws and demonstrating clutch adjustment
  • Screwdriver Bit — Driving screws into the wood board
  • Wood Board — Providing a surface for screw driving practice
  • Wood Screws — Practicing driving screws to various depths

What they say

Hide

Let's get after it. These numbers are your clutch, and it determines how much torque is applied before it starts slipping. So, when you're drilling, start with the lowest setting and bump it up until you get the screw where you want it. So, now when we drive this screw, it'll stop perfectly. Setting your clutch appropriately also works great for drywall, so you don't tear through your paper. Hey,

Auto-generated from the video audio.