Install Cabinets & Hardware

cabin installation went very smooth the most important part is to use wedges to level the cabinet from both the back wall and from the bottom of the cabinet and then securing it to the back wall studs through the back stretchers as well as the sides of the face frames now I recommend clamping the face frames together first level the cabinet with wedges pre drill the pilot holes in the face frame to prevent any kind of cracking or tear out in the wood and then carefully drive three and a half inch screws securing this cabinet in place I cut the side filler pieces for the cabinet painted them the same color as the cabinet scribed from the inside with a pencil to get the fitted size cut it on my table saw and secured in place using wood glue and Brad nails if you're having a hard time getting in place with some clamping pressure you can put little wedges down the sides while the glue dries [Music]