Install Accent Wall & Decorate

18:02

19:56

606.6K views

At 18:02 in

DIY Under Staircase Makeover | Closet to Pantry

Watch on YouTube

What happens here

Cut 1-inch wide strips from MDF (Medium-Density Fiberboard) on a table saw. Prime and paint these strips the same color as the surrounding walls. Using a brad nailer and wood glue, install the painted MDF strips to the back wall of the bar in a decorative pattern (e.g., geometric or chevron). Fill all nail holes with wood filler, sand smooth, and caulk around the edges for a seamless, built-in look. Finally, arrange desired glassware, plates, bottles, and other decorative items on the shelves and countertop to complete the beverage bar setup.

Goal: Cut, paint, and install a custom accent wall using MDF strips in a patterned design, then decorate the finished bar area.

Tools and materials

Brad Nailer
Caulk Gun
Level
Measuring Tape
Miter Saw
Paint Sprayer
Pencil
Safety Glasses
Sanding Block
Table Saw
Brad Nails Unspecified
Caulk Unspecified
Glassware & Decor Unspecified
Water-Based Primer Unspecified
Wood Filler Unspecified
Wood Glue Titebond

What they say

(808 characters)

Hide

protect the countertop from staining for the X and while I had half a sheet of MDF laying around from a previous project so I cut up a bunch of 1-inch strips on my table saw now MDF is very porous when it comes to painting so to making easier for me I first sprayed two coats of water-based primer using the finish spray attachment from the wagon areflexia 5000 and when the boards were dry I started coming up with a pattern and secured the strips to the drywall using two and a half inch Brad nails after they were hung I filled in all the nail holes using wood filler sanded everything smooth and then cocked around all the edges to give it a smooth built-in finish I sprayed the new accent wall with the same color as they did the walls in the previous step [Music] hey that is it for me this week thanks

Auto-generated from the video audio.