Construct Cabinet Boxes (Plywood)

started on the cabinet build week which typically cheap store-bought cabinets are made out of half-inch Sparkle board for the base with reinforcement pieces and disguised with cheap quarter-inch panels to give it the illusion of solid wood in order to keep costs low now I decided to make mine at a 3/4 inch thick plywood to make sure that these cabinets will outlast a house itself not to mention the heavy counter top up planning for this cabinet [Music] when we try to make [Music] wanker just [Music] I think we're due for a little recap as far as what happened here so we made our dimensions how we want them let me know what you guys something I mean these are like 34 inches tall on average they're 24 26 inches deep I mean I'm on obviously longer or deeper but here's the main idea down below here I did a three eights and a three eights together make three quarters and that is a dado cut and so basically a rabbet cut that this can sit right into it and then these are just structures to reinforce it just scrap pieces of pocket holes and this is a toe kick right here typically it's three and a half inches tall and three inches deep when the cabinets