Cut and Frame Plywood Backboard

let's go all right folks to get started this project we went with 3/4 in finished grade Oak plywood at your local hardware store it's about 59 bucks a sheet I used about 3 and 1/2 sheets on this particular project to start to finish now one of the first Parts on the project we're going to build the backdrop which everything's going to get secure too to accomplish this it's about 4 and 1/2 ft and and we are going to beef it up a little bit and to Beef It Up We're going to cut 2in long or 2in wide specifically strips and then we're going to trim it out once it's trimmed out we're going to use the same 2in wide strips to fill in the middle as cleats for strength you don't want this thing to flex or warp or bend you want to be