Skip to main content
Stesso

Fabricate and Paint Drawer Fronts

9:13
16:17
996.2K views

At 9:13 in

DIY Twin Built-in Bunk Bed For Kids

Watch on YouTube

What happens here

Cut MDF panels to the exact dimensions of your drawer openings. Use a router with a chamfer or bevel bit to create a decorative edge around the perimeter of each drawer front. Mark out a geometric pattern (e.g., 60-degree angles every 6 inches) on the drawer fronts. Use a track saw set to a shallow depth (e.g., 1/8 inch) to cut grooves along these marked lines, creating a paneled look. Prime the drawer fronts with a water-based primer and then paint them with urethane emerald alkyd paint using an HVLP sprayer for a smooth, durable finish.

Goal: Cut decorative drawer fronts from MDF, rout bevel edges, create a groove pattern, prime, and paint them.

Tools and materials

  • HVLP paint sprayer
  • MDF panels
  • Measuring tape and pencil
  • Router with chamfer bit
  • Track saw
  • Urethane emerald alkyd paint (white)
  • Water-based primer

What they say

Hide

that flex okay so here is uh our base frame for our drawer very basic very simple so first things first i need to put a bevel edge around it to keep things from tearing out if uh these corners are sharp it's easy for you to catch something and then tear out but if you round them over they're a lot stronger so that's the first thing i'm going to do round over then i'm going to create a line down the middle that's how the pattern was and then every i don't know we'll say every six inches will create a 60 degree angle spreading it wide i'm going to use a straight edge to trace my pattern out and then use a tracks out with about an eighth inch depth start creating all the grooves

Auto-generated from the video audio.