Prepare and Repair Tabletop Surface
At 7:40 in
DIY Plywood Herringbone DinningTable
What happens here
Start by sanding the edges of the tabletop with 150-grit sandpaper, using a sanding block to ensure even pressure and smooth the transition from the edge banding to the tabletop surface. After initial sanding, apply Minwax Color-Changing Wood Filler, or a similar wood filler, to any nail holes, gaps, or imperfections on the tabletop surface and edges. This particular wood filler is convenient as its color changes from pink to natural wood tone when dry, indicating it's ready for sanding. Scrape off excess filler with a putty knife. Once the filler is dry, sand the entire tabletop surface again with 150-grit sandpaper, ensuring all filler is flush and the surface is smooth. Wipe away all sanding dust thoroughly with a clean cloth, potentially using a tack cloth or vacuum for best results, to ensure a clean surface for staining.
Goal: Begin by sanding the tabletop surface to achieve smoothness, then apply wood filler to any imperfections. Follow with thorough sanding and cleaning to create an optimal base for finishing.
Tools and materials
- Putty Knife
- Random Orbital Sander
- Sanding Block
- 150 Grit Sandpaper
- Clean Cloth / Tack Cloth
- Minwax Color-Changing Wood Filler Minwax
What they say
(711 characters)Hide
What they say
(711 characters)Auto-generated from the video audio.