Final Sofa Frame Assembly

for the final assembly assembly is gonna consist of the same ingredients pocket holes and wood glue I'm gonna place four pocket holes on the left and right hand side of the backrest I'm gonna place them on the side that's gonna be the inner part of the backrest basically the part that's gonna be concealed with the backrest pillows I'm gonna lay it on its back and I'm gonna bring the armrests closer to it I'm gonna line and measure eight inches from the ground basically this is the part that's gonna have the legs dangling off of it I'm gonna lather on some wood glue and secure it with the four pocket screws on both the left and right hand side seating is gonna be done the same way I pre-drilled six pocket holes from the bottom of the seating area plenty of wood glue squeeze that on the end grain brought it over and secured it with the six pocket hole screws into place for its final connection of the bottom seating area to the armrest use plenty of wood glue clamp it together with a clamp to make sure it's leveled and pre-drill the hole for the screw to go in now one option is to use six inch long screws or the second option is to pre-drill the hole wide enough for you to actually fit a three inch screw and have good contact in there we still have to finish off the