Skip to main content
Stesso

Assemble and Install Center Unit

6:31
17:09
570.9K views

At 6:31 in

DIY Built-in Closet Organizer

Watch on YouTube

What happens here

Assemble the central shelving unit by connecting the pre-cut shelves to the vertical side panels using wood glue and pocket hole screws. Ensure all corners are perfectly square by using a large carpentry square during assembly to prevent 'cattywampus' results. Double-check measurements diagonally across the assembled unit to confirm squareness. Once assembled, position the unit centrally within the closet. Create small scrap wood brackets and attach them to the inside back of the unit. Secure the unit to the wall studs using screws through these brackets to prevent wobbling.

Goal: Assemble the core vertical shelving unit using wood glue and pocket hole screws, then secure it in the center of the closet.

Tools and materials

  • Drill/Driver
  • Large Carpentry Square
  • Measuring Tape
  • Pocket Hole Screws
  • Scrap Wood Pieces
  • Stud Finder
  • Wood Glue

What they say

Hide

[laughter] As you can see, I'm using a large carpentry square here. Main reason why is it might look square here, and you know, you might set it here and be like, "Oh, that's 90°." But you also need to check the X and the Yaxis, and that way you know your shelf is not all catty wonkous. So, made a lot of mistakes before I learned that trick. 41. Checking [music] it for square. A little bit off. 40 and 1/2. 40 and 1/2. Okay. It's a beast. I am going to attach this scrap piece on the inside here to attach it to the studs of the wall. and to keep it from wobbling, obviously. After you got everything lined up. Mine's like 18 and 58 on each side. Once you got it lined up, measure from the bottom because right now it's still kind of swinging a little bit. And at that point, find where the previous studs walls are and then start securing these brackets to it. We'll put the shelves and do same thing there. So, let's make the structure now.

Auto-generated from the video audio.