Introduction to Sunfire SF120 and Shop Overview

folks today on the Stony Ridge Farm Channel we'll show you how I'm taking this heater and heating an 8500 ft shop welcome to Tool Tuesdays this is going to be awesome check this out no fumes indoor Farm welcome back to the Stony Ridge Farm Channel folks if this is your first time here your 50 millionth time please hit that like button subscribe to the channel this is tool Tuesday and we're out here in front of the mega shop we'll get you some Drone footage of this shop building this is a 112 by 50 foot by 24t tall ceiling insulated shop now I'm saying that this shop stays pretty warm the temperatures stay pretty consistent throughout the year we're going to walk in the door I haven't even been in here yet today I fired up this heater last night to heat the shop up to keep the pipes from freezing so without further Ado let's go in the mega shop and we'll show you guys what's going on again guys we'll talk about the shop really really quickly this is a mess it's a bit of a mess this is going to be the finished area there are three four Bays one 2 3 and four this is a 28x 50ft bay and we're going to do a finished out area and an upstairs apartment up in the Loft so that being said all this is shop area let's go ahead and we'll turn on the lights the lights are last week's feature the voltrex lighting and that LIF the shop up check it out we'll turn this off and turn it back on that one light will light and 8500 ft shop that is really cool so over here is what we're talking about so it's 54° in the shop right now my thermometer right there tells me it got down to 46 in here last night now that really says something for this structure and the insulation in this structure so it's r13 in the walls and r19 or R23 in the ceiling this is an agricultural building meaning it didn't have to be built to any sort of spec but we tried to build it to where it would be the most efficient I have two wood stoves that are going in the shop one's going in right here and this is going to be a common area this is going to be the butcher shop area and then I've got another one that's going to go in right here and it's a little bit bigger wood stove and those are Kuma stoves that are going to go in they're sitting over there on a pallet but I don't have time to install them immediately so we got to be able to work in the shop and have the temperatures tolerable 54° is pretty tolerable for me but we want to knock the chill off especially if msty Ridge comes up here and works this…