Skip to main content
Stesso

Concrete Pouring and Structural Elements

9:02
13:41
22.6K views

At 9:02 in

Cool Trucks and Crazy Concrete Guys 4K

Watch on YouTube

What happens here

Once the concrete arrives via the conveyor system, workers immediately begin pouring it into the forms, spreading it roughly with rakes and shovels. The narrator explains the structural elements being poured: a 12-inch thick slab with rebar reinforcement (bell footing) around the perimeter, and internal column footings that are dug down to support the house's main columns. This ensures the slab has sufficient strength and stability.

Goal: Pour the concrete slab and integrate structural footings.

Tools and materials

  • Rakes — Spreading and leveling wet concrete
  • Rebar — Reinforcing the concrete slab, especially in the bell footing
  • Shovels — Moving and shaping wet concrete
  • Waterproof Boots — Protecting feet while working in wet concrete
  • Waterproof Gloves — Protecting hands from wet concrete
  • Concrete Bonks Custom Mix Concrete — Forming the slab and footings

What they say

Hide

that dumps into the second conveyor belt and then they just move that shoot around we put well we started at 700 a.m. Saturday morning and I I think we got well we we got two or three uh concrete truck loads in by heck we were done by 9:00 [Music] a.m. [Music] now what you can't see here because the of the poly is we have a bell footing so around the entire perimeter of the pad it's a 12in thick and slab fortified with rebar which we did pull that rebar up but then inside of the pad itself is another footing that's dug down and those are designed to support the columns which are going to eventually support the house so we have the Bell footing and then we have all these column footings which unfortunately are covered [Music] up

Auto-generated from the video audio.