Skip to main content
Stesso

Pouring, Vibrating, and Finishing (First Attempt - Failed)

10:45
29:00
9.5K views

At 10:45 in

CONCRETE COUNTERTOPS - Lessons Were Learned!

Watch on YouTube

What happens here

After mixing, the concrete is poured into the formwork. To ensure no air pockets remain, a concrete vibrator is used. The vibrator is inserted into the wet concrete, causing it to liquefy temporarily and release trapped air. After vibrating, the edges of the formwork are sealed with caulk to prevent any concrete leakage. The surface is then smoothed using a hand float to achieve a relatively even finish.

Goal: Pour concrete into the formwork and achieve a smooth, air-free surface.

Tools and materials

  • Caulk — Sealing the edges of the formwork to prevent leaks
  • Caulk Gun — Applying caulk to seal formwork gaps
  • Concrete Mix — Filling the formwork for the countertop
  • Concrete Vibrator — Removing air bubbles from the wet concrete
  • Hand Float — Smoothing the concrete surface after pouring
  • Shovel — Scooping concrete into the formwork

What they say

Hide

rock all right Shan's meticulously crafted plan was unfolding flawlessly but a fatal misstep had already been taken leave a comment below if you know what it was [Music] all right we got a little drippage here so this see this says you can you can put it on when it's wet we'll see last time we cauled it the inside cuz there's more noticeable gaps I thought this would be tight enough but hey now we're vibrating it you know we're really jostling them all around so makes sense but we'll be able to give a good report on this call see if this stuff works good Jose what do you think

Auto-generated from the video audio.