Fabricate and Assemble Cabinet Doors

well we will be assembling our doors using a three-piece router kit style rail and the panel bin [Music] make sure you know which way is up typically the top part of the bit like right here is gonna be the back side you don't want to when you rotate flip them this way because you're going to have one front one back and look at that folks a beautiful perfect door could not be happy with it the doors are all dried and finished up they look great i'm gonna take them out of the clamps sand off any wood glue that's there round over the edges and then we'll start installing the hardware to fit them on and this is just an alignment on the side and this is a forstner bit that creates a hole that you cut flush to the top and this will sit perfectly inside of it i'm also going to pre-drill these holes here because i don't want this to crack because it's a little more dense all