Perform Final Water Flush

cleaning process so now start running water through your hoses so what i like to do now i've got this thing you know all clean the rock filter is clean um the hoses got water in them the manifold filter is clean i like to switch over to fresh water completely clean swish it on one more time now we're running really clean water through so i'd switch guns now run some water through that other gun if you're running two guns can you clean them both spray them both at once or go ahead let's give it a try we'll give it a try cleaning you don't need a lot of pressure just water flowing through it so yeah you and then you want to stop that and then we also want to run clean this off and we want to run fresh water through our prime valve if you actually ran paint through it so we're gonna run hold on to it fresh water through there now you can run your guns again so what i like to do too is um every now and then i'm going to lift this up let water run out if it looks fresh and clean there's no paint mixed in the water then i know my sprayer is almost completely cleaned out i'm going to run a little bit more through prime valve run a little bit more through your gun now you can stop that what i what i like to do is um you want this to be completely fresh clean water and the way i'll run some in my hand you can see there's a lot of black in there still a lot of paint still mixed in there so it's not quite clean yet so we're going to continue running some water through there but want to stop stop right now what i like to do is instead of just continually doing that we're going to go off do some other things it's going to set for a little bit and the just the water setting the lines is going to help dissolve any paint stuck in the lines built up in the lines or in the guns and then we'll come back run a little bit more water through it again it'll be crystal clear you know when we come back the next time one other step that we